dB Technologies DVA MS12
environ 2 semaines
Quantité | Prix unitaire | Vous économisez |
---|---|---|
À partir de 2 | 1 740,00 € * | 0.34 % |
À partir de 4 | 1 725,00 € * | 1.20 % |
Malheureusement, cette description de produit n’est pas encore traduite.
Especially designed to fit perfectly with an M2M and M2S array, the MS12 active sub is equipped with a single 12" woofer in a bass reflex enclosure, acting as a perfect low-end extension module for DVA Mini systems.
This subwoofer delivers an incredible SPL considering its very compact dimensions, and it can be easily used both flown and ground stacked.
The smart design of the feet allows the user to avoid the dull removal of the flying brackets: it is possible to remove the feet in few seconds and screw them again upside-down. In this way any contact between the flying brackets and the ground is avoided, as only the rubber feet will touch it. A practical X-over out can be used to feed signal straight to the line arrays modules, simplifying considerably the signal and power cabling.
DVA MS12 comes with the new generation of exclusive digital amplifiers Digipro G3, engineered by dBTechnologies and distinguished by an exceptionally lightweight design and a very remarkable efficiency.
An integrated USB B-type port on the DVA MS12 amplifier allows the user to access the complete telemetry of the sub, monitoring the status of the speaker, including total playing hours, temperatures and performances reports.
- ACTIVE BASS REFLEX SUBWOOFER
- FLYABLE
- INTEGRATED HARDWARE WITH INNOVATIVE QUICK-LOCK MECHANICS
- LIGHTWEIGHT
- 700W RMS DIGIPRO® G3 CLASS-D AMPLIFIER
- SWITCHED MODE POWER SUPPLY WITH AUTO-RANGE
- DIGITAL CONTROLLER ON BOARD
- DUAL FUNCTION FEET
Technical Data | |
Speaker Type: | Active bass reflex flyable subwoofer |
Acoustic data | |
Frequency response [-6 dB]: | 45 Hz-140 Hz |
Frequency response [-10 dB]: | 40 Hz-165 Hz |
Max SPL: | 131 dB, one unit |
LF: | 12 " |
Voice coil LF: | 3 " |
Directivity: | Omnidirectional |
Amplifier | |
Amplifier technology: | digipro® G3 |
Amp Class: | Class-D |
Power Supply: | 700 W SMPS with PSU Auto-range |
LF Amp: | 700 W RMS (1400 W Peak) |
Cooling: | convection |
Processor | |
Controller: | DSP 56 bit |
AD / DA Converter: | 24 bit / 48 kHz |
Controls: | X-Over frequency selection, Phase selection (0 ° or 180 °), Output mode selection (Link / X-over), Mini-USB type, B 'port (service data) |
Limiter: | Dual active, Multiband, RMS / Peak, Temperature |
Crossover frequency LF-HF: | 110 Hz-140Hz |
LF X-over out slope: | 24 dB / octave |
Mechanics | |
Case: | Multiplex plywood - Polyurea painting Handles: 1x left, 1x right |
Feet: | 4x Dual Position Reversable Feet (flying / stacking mode) |
Fitting: | M20 for Pole Mount |
Lu.-Ve.: | 08 h – 17 h |
environ 2 semaines
Lu.-Ve.: | 08 h – 17 h |