JBL PRX718 XLF

The PRX718XLF, extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/sat system or in multiples as part of a scalable, large format sound reinforcement system, the PRX718XLF performs with extreme efficiency and control.


Features

• 134 dB peak SPL
• 18" Differential Drive® low-frequency driver for low-distortion and higher SPL
• Efficient Class-D amplifier technology
• DSP Input limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ
• Integrated stereo pass-thru, with selectable HP filter, and polarity reverse
• 2 x XLR-1/4" combination inputs, with 2 x XLR loop-thru
• 20 mm threaded pole socket for solid, secure satellite speaker mounting.
• Multiple handles with comfort rubber grips for easy transport
• Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish.
• Cloth backed, dent-resistant 16 gauge steel grilles
  

• The PRX718XLF extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/sat system or in multiples as part of a scalable, large format sound reinforcement system, the PRX718XLF performs with exceptional efficiency and control. The subs are stackable and light-weight ensuring quick set-ups and tear-downs. And due to their rugged construction are perfect for AV rental inventories. With a pole receptacle (that accepts a SS4-BK or SS4-BK24) on the top panel and integrated stereo pass-thru this is the most powerful low-frequency complement to the PRX full-range systems. The addition of a polarity reverse option further enables system optimization.
• The PRX718XLF is a high performance self-powered subwoofer system. The PRX718XLF is comprised of a powerful 2278H Differential Drive® dual voice-coil and magnetic gap, woofer driven by a 1500 Watt Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable cross-over functionality, polarity optimization, protection, dynamic limiting and discrete component optimization.
• All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability.
• The amplifier input panel offers stereo inputs with XLR or ¼ inch jack compatibility. A user selectable crossover ensures a smooth transition to full-range system connected to the stereo outputs. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.

• Power Rating 1500 W
• Frequency Range (-10 dB) 30 Hz - 103 Hz
• Frequency Response (±3 dB) 35 Hz – 87 Hz
• Internal Crossover Frequency 100 Hz DSP controlled 48 dB filter slope
• Loop out Crossover Frequency 120 Hz analog 24 dB filter slope
• Maximum SPL 134 dB peak
• Signal indicators Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting
• Signal: Green LED indicates signal present
• Power/Standby: Blue indicates system has power and ready to pass audio,
• Red indicates system has power but is in a power saving mode and will not pass audio.
• Dynamic Control (Input) dbx Type IV™ limiter circuit
• Input Impedance 20K Ohms (balanced)
• Polarity normal or reverse polarity
• LF Driver 1 x JBL 2278H 460 mm (18 in) woofer
• Enclosure Rectangular, 18 mm, plywood
• Suspension / Mounting M20 threaded pole socket on top
• Transport 2 x injection molded handles with backing cup
• Finish Obsidian DuraFlex™ finish
• Grille Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
• Input Connectors Two Balanced female XLR/ 1/4" combo connectors
• Output Connectors Two balanced male XLR connectors.
• Dimensions (H x W x D) 690.372 mm x 523.24 mm x 723.9 mm (27.18 in x 20.60 in x 28.50 in)
• Net Weight 36.8 kg (81 lb.)