LD Systems MAUI® 28 G3 SUB - Powered 12" Subwoofer for MAUI 28 G3
- Powered 12" subwoofer with flow-optimised bass-reflex ports
- 12" custom-designed woofer with deep bass down to 37 Hz
- Preset for cardioid subwoofer configuration
- DynX® DSP (Gen.2) technology for distortion-free sound at maximum volume
- Automatic set-up detection (MAIN / FOLLOWER)
- Rugged subwoofer housing made out of polyurea-coated birch plywood
- Shockproof front grille for ultimate speaker protection
- Four ergonomic handles for easy handling
With the MAUI 28 G3 SUB subwoofer, you extend the cardioid characteristics of our professional column speaker series right into the bass range.
What does this mean?Simply position the SUB next to your MAUI® 28 G3 facing the rear direction, switch on the Cardioid preset and you will have a quieter and controlled Low-End on the back while still keeping the punch on the front. Low-End frequencies on the back of the system will be dampened by -15 dB. For extra Bass, keep the SUB in the same direction as your MAUI® 28 G3 and switch off the Cardioid preset.
Setting up the SUB with your MAUI® 28 G3 is straight forward and fast. Thanks to its automatic set-up detection system the SUB immediately switches to FOLLOWER mode as long as no column is attached.
Also recommendable is the protection cover and castor board to make transportation easy and keep the SUB as long as possible free of any touring-damage.
The MAUI® 28 G3 SUB Wfeatures the same design construction as the MAUI® 28 G3 W subwoofer and will be the perfect addition to get your Low-End in control.
Technical data:Product type: | PA subwoofer |
Type: | Subwoofer |
Color: | Black |
Max. SPL (Peak): | 127 dB |
Frequency response (-10dB): | 37 Hz - 20000 Hz |
Weight: | 22,8 kg |
Features: | Bluetooth Audio Streaming |
Features: | Cardioid column |
Features: | DSP-based Signal Processing |
Features: | Excellent Sound Dispersion |
Features: | Mono/ Stereo Application |
Woofer dimensions: | 12 " |
Woofer dimensions (mm): | 305 mm |
Woofer magnet: | Ferrite |
Woofer brand: | Custom-made |
Woofer voice coil: | 3 " |
Woofer voice coil (mm): | 76.2 mm |
Cabinet construction: | Bass Reflex |
Housing material: | 15 mm Birch Plywood |
Cabinet surface: | Polyurea |
Dimensions Subwoofer (W x H x D): | 370 x 527 x 472 mm |
Subwoofer weight: | 22.8 kg |
Amplifier: | Class D |
System output (RMS): | 1030 W |
System output (Peak): | 2060 W |
Protection circuits: | DC protection |
Protection circuits: | Multiband limiter |
Protection circuits: | short circuit |
Protection circuits: | thermal protection |
Cooling: | Convection |
Controls: | Bluetooth HOLD TO LINK button |
Controls: | Cardioid On/Off |
Controls: | Main level |
Controls: | Power On/Off |
Controls: | Sub level |
Indicators: | Bluetooth |
Indicators: | Cardioid On/Off |
Indicators: | Follower mode |
Indicators: | Limit |
Indicators: | Power |
Indicators: | Protect (protection circuit engaged) |
Indicators: | Signal |
Indicators: | Subwoofer Mode |
Mains connector: | IEC power cable (included) |
Operating voltage: | 100 V AC - 120 V AC, 50 - 60 Hz |
Operating voltage: | 220 V AC - 240 V AC, 50-60 Hz |
Fuse: | T 5AL / 250 V |
Power consumption: | 400 W |
Ambient temperature (operating): | 0 - 40 °C |
Relative Humidity: | |
Line Inputs: | 2 |
Line Input Connectors: | Combo XLR / TRS |
Line Outputs: | 1 x Sub OUT |
Line Outputs: | 2 x THRU |
Line Output Connectors: | XLR male |
Number of speaker outputs: | 1 |
Loudspeaker Output Connectors: | Custom-made multipin |
Bluetooth Standard: | A2DP |
Bluetooth Audio Decoder: | AAC |
Bluetooth Audio Decoder: | SBC |
Bit depth AD/DA converter: | 24 bit |
Sampling frequency: | 48 kHz |
Mon-Fri: | 08:00 am – 05:00 pm |
Bulky goods
Mon-Fri: | 08:00 am – 05:00 pm |