LD Systems FX 300 SET - 2-Channel Effect Pedal with Carrying Bag and Power Supply
- Effects processor with 16 digital effects presets in 16-bit quality
- Water-repellent bag with 8 mm padding
- Power supply unit with 9-volt DC at 500 mA
When you take the stage as a singer-songwriter or perform a living room concert, the quality of your sound plays a crucial role in how you are received by the audience. With the FX 300 SET from LD Systems (consisting of effects processor, transport bag and power supply), they will be convinced from the first tone you make - even if there was no time for a proper sound check. The practical little device is not only an effect pedal for your voice and instrument, but also a handy 2-channel mixer. Best of all, the mute functions can be controlled by pedals using your feet or hands. If you want to make an announcement, you can use the FX MUTE pedal to mute all effects so that your voice can be heard clearly without reverberation or delay. If you want neither your microphone signal nor that of your instrument to reach the outputs, simply tap MUTE ALL - extremely practical during breaks or at the end of your set.
The FX 300 offers 16 digital effect presets in 16-bit quality, 2 inputs with separate gain setting and two outputs: one balanced and one unbalanced. Thanks to the +48 V phantom power supply at the mic input, you can connect either a condenser or dynamic microphone. The high-impedance, low-noise instrument input produces impressive sound not only for acoustic guitar and bass, but with any instrument. Thanks to generous headroom, you no longer have to worry about distorted signals. And just in case no power outlet is nearby, the FX 300 can be operated with a 9-volt battery for up to five hours.
Technical data:Product type: | Artist Pedal |
Product type: | Artist Pedal |
Product type: | Power Supplies |
Type: | Home-Recording |
Type: | Live |
Type: | Set |
Type: | Soft carrying case with shoulder strap |
Channels: | 2 |
Mains connector: | IEC connector |
Material: | Nylon 1680D |
Weight: | 0,89 kg |
Color: | Black |
Input voltage: | 100 - 240 V |
Microphone channels: | 1 |
Thickness of the padding: | 8 mm |
Height: | 90 mm |
Mic inputs: | XLR/6.3 mm jack |
Output voltage: | 9 V |
Width: | 180 mm |
Depth: | 230 mm |
Frequency Response Microphone Channel: | 50 - 20000 Hz |
Amplification range Microphone channel XLR input: | 42 dB |
Max. output current: | 0.5 A |
Weight: | 0,18 kg |
Mono Mic Input Input THD-N: | |
Impedance XLR input: | 6000 Ohm(s) |
Polarity: | Center negative |
Cord length: | 150 cm |
Phantom power: | +48V DC to XLR Input |
Microphone channel Jack input Input type: | Electronically balanced |
Amplification range Microphone channel Jack input: | 20 dB |
THD jack input: | |
Width: | 35 mm |
Depth: | 55 mm |
Microphone Equalizer: | +5/-8dB @ 8kHz |
Height: | 60 mm |
Microphone channel controls: | FX SEND |
Microphone channel controls: | Gain |
Microphone channel controls: | tone |
Weight: | 0,06 kg |
Microphone Channels Display Elements: | channel signal |
Instrument inputs: | 1 |
gain range: | 23 dB |
THD: | 0.03% |
Equalizer: | +7/-8dB @ 10kHz |
Channel Inserts: | 1 |
Controls: | FX SEND |
Controls: | Gain |
Controls: | tone |
Indicators: | 3-colour LED (SIG) |
Indicators: | channel signal |
Line outputs: | 2 |
Line output connectors: | 6.3 mm TRS |
Line output connectors: | XLR |
Output level XLR: | Max. +17dBu, balanced |
Impedance XLR output: | 150 Ohm(s) |
Output level Jack output: | Max. +5dBV, unbalanced |
Impedance jack output: | 40 Ohm(s) |
Digital Effects Processor: | Yes |
Number of Presets: | 16 |
Main section controls: | DFX Presets |
Main section controls: | FX MUTE |
Main section controls: | MIX OUT |
Main section controls: | MUTE ALL |
Main section controls: | Power |
Display elements Main section: | Effekt-Clip |
Display elements Main section: | FX MUTE |
Display elements Main section: | MUTE ALL |
Display elements Main section: | red LED (FX CLIP) |
Operating voltage: | 9 V block |
Operating voltage: | External mains adapter 9 V DC / 250 mA (not included |
Ambient temperature ( in operation ): | 0 - 40° °C |
Relative Humidity: | |
Width: | 160 mm |
Height: | 55 mm |
Length: | 163 mm |
Weight: | 0,65 kg |
Features: | Preparation for microphone stand mounting |
- Do you have any questions concerning this product?
- Further products by LD Systems
-
Information about the manufacturerObligation to provide information on product safety (GPSR)Manufacturer:Adam Hall GmbH
Adam-Hall-Str. 1
DE-61267 Neu-Anspach
info@adamhall.com -
Safety instructions and warningsSafety instructions and warnings (GPSR)Specific safety instructions that apply to the product can be found in the operating instructions for the product.
Mon-Fri: | 08:00 am – 05:00 pm |
Document type | File size | |
Operating instructions
(2.89 MB)
|
2.89 MB |
Mon-Fri: | 08:00 am – 05:00 pm |
Mon-Fri: | 08:00 am – 05:00 pm |