DAP-Audio COM-42 Wireless 2-Channel Handheld System

If you would need 2 wireless microphones, and have just one channel available on your inputs, the COM-42 is the ideal wireless microphone set for you. The wireless receiver has a balanced XLR output for each wireless transmitter, and also an unbalanced MIX output on a 6.3 mm Jack plug. By using the volume buttons on the front of the receiver, it is easy to setup the desired balance between 2 transmitters. The COM-42 has 99 frequency present which can be set easily through infrared synchronisation technique. A clear LCD display shows the signal strength, audio level and carrier frequency of each channel. A COM-42 wireless microphone set contains a receiver and 2 metal handheld transmitters. Also it is possible to use an optional beltpack transmitter.Technical data:

Wireless Microphone Frequency Start:	606 MHz
Wireless Microphone Frequency End:	630 MHz
RF Power:	10 mW
RF Bandwidth:	24 MHz
THD Level:	Signal-to-noise Ratio:> 100 dB
Microphone Type:	Dynamic moving coil
Microphone Sensitivity:	2.2 mV
Polar Pattern:	Cardioid
Max. SPL:	135 dB
Frequency Response Minimum:	50 Hz
Frequency Response Maximum:	16000 Hz
RF Antenna Inputs:	2
RF Antenna Input Connection:	BNC
Microphone Output:	1
Microphone Output Connection:	3-pin XLR / TRS unbalanced 6.3 mm
Battery Type:	AA
Runtime Average:	6 h
Transmitter Type:	Handheld
Receiver Type:	True diversity
Power Connector in:	Low Voltage DC plug
Weight Transmitter:	0.27 kg