LD Systems DQOR® SUB 8 D W - Active Dante Indoor/Outdoor Installation Subwoofer, White
- 8" active subwoofer with 10" passive radiator
- 190 W RMS output power
- Dante audio connection (2-channel)
- Modern, dynamic design with robust aluminum housing
- Optional surface mount box (wall + ceiling) with hinges for easy installation
- IP55 protection class for outdoor use
The DQOR® SUB 8 D from the DQOR ® series is an active subwoofer for indoor and outdoor installation with an 8" woofer and a 10" passive radiator. With an integrated Dante audio connection, it can be easily connected to any network audio system. The subwoofer supports the AES67 standard, making it compatible with thousands of audio devices.
Designed to deliver powerful performance in a compact format, it delivers powerful bass sound without the need for separate amp racks.
The DQOR®SUB 8 D is the only Dante-enabled subwoofer on the market that is suitable for outdoor use.
Its clean, low-profile design makes the DQOR® SUB 8 D an elegant addition to any room, combining aesthetics with powerful audio performance. With 190 W RMS and a maximum output of 230 W, it delivers impressive sound quality with up to 108 dB SPL and an extension of low frequencies down to 37 Hz.
The DQOR® SUB 8 D features rubber feet for floor mounting or can be easily installed with the optional surface mount bracket. This offers flexible mounting options, holes for clean cable management, locking screws, a security lock, and a hinge mechanism for quick deployment.
The AC inputs are connected via a 3-pole Phoenix Contact clamp with lever push-in connection to reliably and securely connect the power cables. Clamp connector plug-in connectors enable remote control of the standby mode.
The DQOR® SUB 8 D can be used in many different areas, such as hospitality, retail, entertainment or corporate.
It is available in black or white (RAL9005 & RAL9016).
Technical data:GeneralPolarization pattern: | omnidirectional |
Peak output power: | 230 W |
RMS output power: | 190 W |
amplifier class: | Class D |
SPL (1 W/1 m): | 86 dB |
Max. SPL Peak (Sine Burst, Halfspace/1 m, THD=10 %): | 110 dB |
Max. SPL Peak (Pink Noise, Halfspace/1 m, CF 4): | 119 dB |
crossover frequency: | 110 Hz. |
Protective functions: | Short circuit, overheating, overvoltage, undervoltage, direct current |
color: | white |
RAL color code: | RAL 9010 |
Number of Dante® inputs: | 1 |
Dante® port type: | RJ-45 socket |
Channel configurations: | Stereo (2 channels) |
Max. channels (44.1 kHz/48 kHz): | 2 |
Sampling rate: | 48 kHz |
Bit depth: | 24-bit, 32-bit |
Bit depth of the AD/DA converter: | 24 bits |
Sample rate AD/DA converter: | 48 kHz |
Min. signal-to-noise ratio (SNR): | 96 dB |
System latency: | 2 ms |
Output power sub per channel (RMS): | 190 W |
Output power sub per channel (peak): | 230 W |
GPI-controllable functions: | standby |
Size: | 8 ? |
Magnet: | Ferrite |
Voice coil: | 2.5 ? |
Passive radiator: | 10 ? |
Operating voltage: | 100 V AC - 240 V AC (±10 %) / 50 - 60 Hz |
Power consumption: | 270 W |
Power consumption in idle: | 18 W |
Max. power consumption in standby: | 2 W |
Power supply type: | Switch-mode power supply (SMPS) |
Starting current: | 2.4 A |
Fuse: | T3.15AL/250 V |
Changing the fuse: | possible from the outside without opening |
Auto-standby after: | 20 min |
Wake-up time in standby mode: | 3 s |
Type: | Closed with passive radiator |
Housing material: | die-cast aluminum, plastic |
Front grille material: | aluminum |
Cooling system: | convection cooling |
Ambient temperature: | -10 - 50 °C |
Maximum humidity (non-condensing): | 85% |
Security class: | Class 1 |
width: | 537.4 mm |
Height: | 304.4 mm |
Depth: | 208.1 mm |
Weight: | 15.2 kg |
- Do you have any questions concerning this product?
- Further products by LD Systems
-
Information about the manufacturerObligation to provide information on product safety (GPSR)Manufacturer:Adam Hall GmbH
Adam-Hall-Str. 1
DE-61267 Neu-Anspach
info@adamhall.com -
Safety instructions and warningsSafety instructions and warnings (GPSR)Specific safety instructions that apply to the product can be found in the operating instructions for the product.



Mon-Fri: | 08:00 am – 05:00 pm |




Mon-Fri: | 08:00 am – 05:00 pm |
