LD Systems AMP 205 - 2-Channel Mini Installation Power Amplifier 2x50 W @ 4 Ohm

NEW

Preview: LD Systems AMP 205 - 2-Kanal Mini Installationsendstufe 2x50 W @ 4 Ohm

LD Systems AMP 205 - 2-Kanal Mini Installationsendstufe 2x50 W @ 4 Ohm

Sale to reseller only

Availability:

Currently not available

Product inquiry

Item number: 210906040

EAN: 4049521798818

MPN: LDAMP205

NEW

2-channel mini installation amplifier 2x50 W @ 4 Ohm Professional mini amplifier 2 x 50W... more

Back to the overview

All information about the product:

"LD Systems AMP 205 - 2-Channel Mini Installation Power Amplifier 2x50 W @ 4 Ohm"

2-channel mini installation amplifier 2x50 W @ 4 Ohm

Professional mini amplifier
2 x 50W Class-D amplifier with low-impedance outputs
Small format 1/3 19" rack, 1U
Silent operation with passive cooling
Connection options for remote control of standby mode and volume
External 100-240V power supply
Mounting plates for flexible, unobtrusive mounting, even above suspended ceilings
Automatic standby mode to save energy
Balanced line input and speaker output with terminal blocks
User-friendly front panel with signal, clip and protection LEDs
Optional rack tray for combining with other products in the TICA® series

The AMP205 is a professional 2-channel mini installation amplifier. As part of the TICA® series, it combines compact dimensions, passive cooling and high efficiency – ideal for a wide range of audio installation applications.

The highly efficient 2x 50W Class-D amplifier features 4-ohm outputs and a user-friendly front panel with signal, clip and protection LEDs. A gain switch helps the amplifier handle a wide range of input sources.

Thanks to its compact dimensions of 142 x 53 x 221.7 mm and the supplied mounting plates, it can be installed almost anywhere inconspicuously: behind monitors, under tables or even in ventilation ducts and above plenum ceilings. Alternatively, it can also be installed in a third of a 19-inch rack. With the optional rack tray, you can mount up to four products from the TICA® series next to each other, allowing you to put together a system that suits your needs and takes up little space in the rack.

With remote control connectivity for third-party devices, you can always adjust the volume on both channels or put the power amp into standby mode, even if it is hidden. The optional auto standby mode saves power when there is no audio transmission.

Terminal block connections on the balanced line inputs and speaker outputs make wiring particularly easy.

The perfect solution for professional installers and users looking for a compact, highly efficient and easy-to-integrate solution.

Technical data:

Product type:	installation amplifier
Line inputs:	2
Line input connectors:	2 balanced line inputs.
Line input connectors:	Pitch 3.81 mm Terminal Block (3-Pin)
Line outputs:	0
Powered outputs:	2 with output mode selector (stereo / parallel / high power mode)
Cooling:	convection
Priority levels:	1

entrance area

Nominal input sensitivity:	14 dBu / 2 dBu (switchable gain +12dB)
Nominal input attenuation:	18 dBu (Sine 1kHz, amplification 0dB)
Inlet connection:	2 x 3.81mm Terminal Block 3-pin
Wake-up threshold in standby mode:	2.5 seconds

starting area

Type:	Class D
output modes:	High Power Mode (ST / PAR / HPM)
output modes:	parallel
output modes:	stereo
Amplifier outputs:	2-channel (ST, PAR) / 1-channel (HPM)
Connection:	4 - Pin Terminal block (pitch 5,08mm)
RMS power (W):	1 x 100 W @ 2ohm (Continuous sine wave 1kHz 10sec, 4 ohm load)
RMS power (W):	2 x 50 W @ 4ohm (ST, PAR)
Power (peak) (W):	1 x 110W @ 2ohm (Continuous sine wave 1kHz 10sec, 4 ohm load)
Power (peak) (W):	2 x 55 W @ 4ohm (ST, PAR)
Minimum load impedance:	2 ohms (HPM mode)
Minimum load impedance:	4 ohms (stereo and parallel modes)
Frequency range:	15 Hz - 20 kHz (-0.5 dB)
Protective circuits:	direct current
Protective circuits:	short circuit
Protective circuits:	overheating
Protective circuits:	overvoltage
Protective circuits:	undervoltage

power supply

Type 1:	External SMPS
Operating voltage:	100 V AC - 240 V AC / 50 - 60 Hz
Fuse:	0
Secondary voltage:	24 V DC
Secondary current:	3.5
Secondary connection:	2-pole 5.08 mm terminal block
Primary connection:	IEC
Security class:	1
Max. power consumption:	105 W (sine 1kHz at 4 Ohm load)
Power consumption (idle):	2 W (no signal input)
Power consumption in standby mode:
Operating temperature (non-condensing):	0°C - 40°C;

General data

Time to automatic standby:	20 mins.
Dimensions (W x H x D) (height with rubber feet):	142 mm x 53 mm x 221.7 mm
Accessories (included):	external power supply
Accessories (included):	Terminal blocks for electrical connections
Accessories (included):	Mounting plates for surface mounting
Weight:	1 kg

Further links

Do you have any questions concerning this product?
Further products by LD Systems
Information about the manufacturer

Obligation to provide information on product safety (GPSR)

Manufacturer:
Adam Hall GmbH
Adam-Hall-Str. 1
DE-61267 Neu-Anspach
info@adamhall.com
Safety instructions and warnings

Safety instructions and warnings (GPSR)

Specific safety instructions that apply to the product can be found in the operating instructions for the product.