Palmer RIVER peene - Passive 2-Channel Line Splitter
- Distributes two input signals to two outputs each + link outs
- For line signals
- Galvanic isolation of outputs by transformers
- Switchable ground lift to isolate ground loop hum
- Neutral sound
- High headroom (+20 dBu max. input level)
- Passive construction, no power supply required
- Extremely fail-safe
- Solid casing made of aluminium and steel
- Incl. rewritable tour label for attachment onto the back of the peene
- Engineered in Germany
Do you want to send a line signal - stereo or dual mono - to multiple devices, without interference such as hum? Then the Palmer peene line splitter box is the right tool for you. It works on a purely passive basis with large isolation transformers, which can even handle high-level signals without distortion. So, for instance, you can send the stereo output signal from the mixer to several power amps, without any ground loops. The Palmer peene also includes a ground-lift switch. In addition to the two transformer-isolated outputs, the peene also directs the input signal on directly via a link out.
The Palmer peene is everything you need to distribute line signals to several devices and is a reliable audio tool with ultra-simple handling and professional sound characteristics.
Technical data:| Product type: | Line Splitter |
| Channels: | 2 |
| Type: | passive |
| Transformer isolated: | Yes |
| Inputs: | 2 |
| input type: | balanced |
| Input connectors: | XLR |
| Outputs: | 4 |
| Output type: | balanced |
| Output connectors: | XLR |
| THRU outputs per channel: | 1 |
| Ground lift switch: | Yes |
| Housing: | Aluminium continuous casting |
| Dimension (H/W/D): | 140 x 50 x 128 mm |
| Weight: | 0,805 kg |
| Ambient temperature during operation: | -20 - 70 °C |
| Relative Humidity: | |
| Accessories (included): | Inscription label (tour label) |
| Accessories (included): | rubber feet |
| Max. input level ( | + 20 dBu: |
| Max. input level ( | + 32 dBu: |
| Frequency response (±1 dB, relative 1 kHz): | 10 Hz - 30 kHz |
| Input impedance (1 kHz): | 6.8 kOhm |
| Output impedance (1 kHz): | 500 Ohm(s) |
| THD (30 Hz, +4 dBu, unity, unweighted): | |
| THD (1 kHz, +4 dBu, unity, unweighted): | |
| IMD (SMPTE) (60 Hz / 7 kHz, 4:1, +4 dBu): | |
| Transformer ratio: | 1:1:1 |
| Mon-Fri: | 08:00 am – 05:00 pm |
| Document type | File size | |
|
Operating instructions | 4.59 MB |
| Mon-Fri: | 08:00 am – 05:00 pm |
| Mon-Fri: | 08:00 am – 05:00 pm |