LD Systems XS 700 - PA Power Amplifier Class D 2 x 350 W 4 Ohms
The XS700 is the flagship of the XS series of power amplifiers and an absolute flyweight with just 1U and 3.4kg. Our Class D power amplifier technology makes it possible to pack high performance into a minimum of space without generating unnecessary loss energy. The power amp has an output of 350W per channel at 4 ohms, 2x 200W at 8 ohms, and 700W in bridged mode. It is conceived for all professional applications in which ease of transport and space is essential, whether mobile or in permanent installations.
The XS700 has all protection circuits against short-circuiting, DC, overheating, and overloading and has a soft-start delay.
The amplifier features XLR, RCA and jack input connectors, with Speakon-compatible sockets and screw terminals as outputs. On the rear panel, it is possible to select the mode of operation and gain and activate the limiter and ground-lift function. LEDs on the front indicate power, signal, clipping, triggering of the protection circuit, and the mode of operation. The XS700 impresses with operational dependability and a transmission range of 20Hz – 20kHz, which is reproduced transparently and dynamically with high impulse fidelity.
Technical data:Product type: | Power Amplifiers |
Type: | PA Power Amplifiers |
Rated ouput power (1kHz @ 4 Ohms): | 2 x 350 W |
Rated ouput power (1kHz @ 8 Ohms): | 2 x 200 W |
Rated ouput power (1kHz @ 8 Ohms, bridged): | 700 W |
Output circuitry: | Class D |
Frequency response: | 20 - 20000 Hz |
Total Harmonic Distortion (THD): | |
Gain: | 36 dB / 27 dB / 31 dB dB |
Input sensitivity: | 0.6 V / 1.7 V / 1.1 V V |
Protection circuits: | DC |
Protection circuits: | over-current |
Protection circuits: | short circuit |
Protection circuits: | soft start |
Protection circuits: | thermal overload |
Controls: | Gain |
Controls: | ground lift |
Controls: | limiter |
Controls: | Mode |
Controls: | On / Off |
Controls: | volume |
Indicators: | clip |
Indicators: | Mode |
Indicators: | Power |
Indicators: | Protect (protection circuit engaged) |
Indicators: | Signal |
Line inputs: | 2 |
Line input connectors: | 6.3 mm jack |
Line input connectors: | RCA |
Loudspeaker outputs: | 2 |
Speaker output connections: | Speakon compatible |
Speaker output connections: | Terminal posts |
Cooling: | low-noise fan |
Operating voltage: | Switching power supply |
Power consumption @ full load: | 860 |
Operating voltage: | 115 V AC / 230 V AC (switchable) |
Width: | 482 mm |
Height: | 44 mm |
Depth: | 244 mm |
Weight: | 3,4 kg |
- Do you have any questions concerning this product?
- Further products by LD Systems
-
Information about the manufacturerObligation to provide information on product safety (GPSR)Manufacturer:Adam Hall GmbH
Adam-Hall-Str. 1
DE-61267 Neu-Anspach
info@adamhall.com -
Safety instructions and warningsSafety instructions and warnings (GPSR)Specific safety instructions that apply to the product can be found in the operating instructions for the product.



Mon-Fri: | 08:00 am – 05:00 pm |

Document type | File size | |
|
Technical drawing / illustration
(0.12 MB)
|
0.12 MB |
|
Information about the product
(2.56 MB)
|
2.56 MB |



Mon-Fri: | 08:00 am – 05:00 pm |




Mon-Fri: | 08:00 am – 05:00 pm |
