LD Systems IMA 60 - Installation Mixer Amplifier 65W @ 4 Ohm / 100 V / 70 V
Delivery time: approx. 2 weeks
- Line input for emergency signal with normally open contact
- 2 mic/line input terminal strips with mic/line switchover and switchable 24 V phantom power
- Switchable gong function for Mic/Line channel 1
- 2 line inputs with RCA jacks plus Bluetooth 4.0 interface (mono sum)
- 65W class D amplifier with LO-Z/HI-Z switch and 4 ohm / 100V / 70V outputs
- Balanced AUX line output with music-mix switchover for controlling external devices such as: amplifiers, active subwoofers, systems for on-hold music
- 4 priority settings for a wide range of integration options
- Switchable auto-standby mode for energy conservation
- Intuitive operation via capacitive controls for selecting the music source and Bluetooth pairing
- Universal wide-range switching power supply
For fixed installations, in addition to an unobtrusive appearance, the flexibility and versatility of the mixing amplifier are particularly important. It must be possible to connect various signal sources and microphones. In an emergency, it must be possible to mute the input signals easily to enable announcements or emergency calls. With the IMA 60, LD Systems presents a new mixer amplifier from the IMA series that leaves nothing to be desired in terms of design and flexibility.
Its compact design in a 9.5-inch enclosure, a wide range of connection options including Bluetooth for wireless connection of music sources, and a multi-level priority circuitry guarantee seamless integration into commercial and industrial applications. The IMA 60 offers four priority levels for emergency calls and microphone/line inputs for various signal and music sources. Optionally, an automatic standby mode can be activated to further reduce power consumption.
The mixer amplifier features two priority contact closures: one for the emergency input, which mutes all other signal sources in the device, and one for the microphone inputs, which mutes the music signal sources. The outputs provide 65 W at 4 ohms, a 2-band EQ for bass and treble, and a 70 V / 100 V tap. The High-Z / Low-Z selector switch can be used to completely disconnect the output signal from the output transformer, ensuring optimal frequency response in low-input-impedance applications. External power amplifiers, active subwoofers or systems for music on hold can be combined with the IMA 60 via the integrated aux output. The music mix selector switch also allows you to decide whether the entire mix or only the selected music signal source should be transmitted to the aux output.
The intuitive design of the control panel with capacitive buttons for selecting the music signal source, the clear layout of the rear panel and the compact 9.5-inch format ensure that no problems arise when installing the mixing amplifier.
Technical data:| Product type: | installation mixing amplifier |
| Emergency entrance: | 1 balanced line input |
| Mic/Line inputs: | 2 |
| Mic/Line input connectors: | 2 unbalanced stereo line inputs |
| Mic/Line input connectors: | Bluetooth 4.0 |
| Music sources: | 2 unbalanced stereo line inputs |
| Music sources: | Bluetooth 4.0 |
| Line outputs: | 1 |
| Main outputs reinforced: | 1 with Low-Z/High-Z switchover |
| Cooling: | convection |
| Priority levels: | 4 |
| Nominal input sensitivity: | -15 dBu (sinusoidal signal, 1 kHz, gain max.) |
| Nominal input attenuation: | 20 dBu (sine 1kHz) |
| Priority Contact closure: | +5 V DC, NO contact (normally open) for potential-free contact |
| Connection: | 5-pole connection terminal, grid 5.08 mm |
| Nominal input sensitivity microphone: | Mic: -40 dBu (sinusoidal signal, 1 kHz, gain max.) |
| Nominal input sensitivity: | Line: -17 dBu (sinus signal, 1 kHz, gain max.) |
| Nominal input overload Microphone: | Mic: -5 dBu (sine signal, 1 kHz) |
| Nominal input overdrive Line: | Line: +19 dBu (sine signal, 1 kHz) |
| Phantom power: | + 24V, 10mA switchable |
| Inputs Mic/Line 1: | 5-pole connection terminal, grid 5.08 mm |
| Inputs Mic/Line 1: | XLR/6.3 mm jack |
| Inputs Mic/Line 2: | 3-pole terminal block |
| Inputs Mic/Line 2: | Grid spacing 5.08 mm |
| Inputs Mic/Line 2: | 1 double RCA mono summed |
| Nominal input sensitivity CD/AUX: | - 6.22 dBV (sine 1 kHz, max. gain) |
| CD/AUX connection: | 2 RCA connectors (2 jacks each, mono-summed) |
| Amplifier outputs: | Low-Z: 4 Ohm minimum load |
| Amplifier outputs: | High-Z: 70V or 100V outputs |
| Amplifier input: | 5-pole connection terminal, grid 5.08 mm |
| RMS power (W): | 65 W (continuous sine signal, 1 kHz, 4 ohm load) |
| Power (peak) (W): | 70 W (100 ms sine burst, 1 kHz, 4 ohm load) |
| Frequency range: | 20 Hz - 20 kHz (LO-Z, -3 dB) |
| Frequency range: | 60 Hz - 20 kHz (HI-Z, -3 dB) |
| Tone control bass: | +/-10 dB (100 Hz) |
| Treble control: | +/-10 dB (10 kHz) |
| Protective circuits: | audio limiter |
| Protective circuits: | short circuit |
| Protective circuits: | overheating |
| Protective circuits: | overvoltage |
| AUX output connection: | 3-pole terminal block, contact spacing 5.08 mm |
| Maximum amplification: | 22 dB |
| Type: | switched-mode power supply |
| Operating voltage: | 100 V AC - 240 V AC / 50 - 60 Hz |
| Power consumption (max.): | Line: -17 dBu (sinus signal, 1 kHz, gain max.) |
| Power consumption (idle): | 7.5 W (no input signal) |
| Power consumption in standby: | |
| Operating temperature (non-condensing): | 0°C - 40°C; |
| Time to automatic standby: | 20 mins. |
| Dimensions (W x H x D) (height with rubber feet): | 210 (W) x 95 (H) x 266.76 (D) mm |
| Optional accessories: | rack-mounting material |
| Weight: | 2.39 kg |
- Do you have any questions concerning this product?
- Further products by LD Systems
-
Information about the manufacturerObligation to provide information on product safety (GPSR)Manufacturer:Adam Hall GmbH
Adam-Hall-Str. 1
DE-61267 Neu-Anspach
info@adamhall.com -
Safety instructions and warningsSafety instructions and warnings (GPSR)Specific safety instructions that apply to the product can be found in the operating instructions for the product.
| Mon-Fri: | 08:00 am – 05:00 pm |
| Mon-Fri: | 08:00 am – 05:00 pm |