beamZ BT420 Lightweight Par 7x 10W + SMD Combi Effect

The BT-4 series is a range of high powered LED pars built into a slimline ABS housing so it can fit in the tightest of spaces like box truss. These fixtures are equipped with a power-connector in/out for daisy chaining multiple units together. All BT4 models have pre-set programs that can be used in stand-alone mode. In the DMX settings there is the choice of different DMX modes with pre-set colour macro's or a mode where you can control every single colour individually per section. The same can be done in stand-alone mode with the supplied remote control. The robust ABS housing and double stand also make the BT Pars ideal for rental as they are lightweight and easy to setup. Ideal for DJs, bands, stages and venues wanting a great colour wash.

• 7x 10W 4-in-1 LEDs and 60x RGB SMD LEDs
• RGBW Colour mixing with full saturation control
• Colour Temp. 2700 - 8000K
• CTB and CTO Colour
• Lightweight ABS housing
• 12 or 17 DMX channels
• Built-in programs
• DMX and Stand-alone mode
• Master/slave function
• 0-100% Dimmer
• Sound controlled
• Auto mode
• DMX in/output via 3-pin XLR
• Control panel with LED display
• Power-connector input/output
• IR remote control
• Double bracket also acts as floor stand

• Supplied features: Master/Slave mode
• Light source: 4-in-1 LED
• LED colours: Red, Green, Blue, White
• LED power : 10
• Colour temperature: 2700K - 8000K
• Quantity of LEDs: 7
• LED power: Backlight: SMD
• Quantity of backlight LEDs: 60
• Beam angle: 23°
• Field angle: 38°
• Illuminance: 8365 lx @ 1m
• Flash rate per second: 0 - 25Hz
• DMX channels: 12, 17
• DMX connector: 3-pin XLR
• Modes: Automatic programs, DMX, Master/Slave
• IP rating: IP20
• Cooling: Fan
• Display: LED
• Power Plug: Power-connector
• Power consumption: 0.86 - 0.4A
• Power supply: 100-240VAC 50/60Hz
• Dimensions (L x W x H): 220 x 270 x 115mm
• Weight: 2.2000
• Accessories: DMX cable, Mounting bracket, Power cable, Remote control, Safety cord