Artecta Havana Dropper 2835 - 60 - Gold 1700 K - CRI 90 - 515 lm/m - 60 LEDs/m - 5 W/m - 24 V

To help you find the right LED strip for your application, we have categorised our LED strips in series and ranges. The Havana series requires a 24 volt power supply and is available in lengths of 5 meter. The Ribbon range includes our IP20-rated LED strips for indoor use in dry conditions. Our Dropper range uses a silicone spray coating and is IP62 rated for use in humid conditions. Our Tube range uses a silicone sleeve to protect the LED strip from dust and water ingress, achieving a protection grade of IP65. And our Jade range has a silicone sleeve that is completely filled with silicone, resulting in an IP68 rating. However, please note that permanent outdoor installation of the LED strips is not recommended as the silicone is not UV resistant. Our Halo range uses COB LEDs and offers the most even light distribution with indistinguishable light sources.
If you require EPREL-compliant LED strips, please have a look at the Cartago or Cali series. For lengths of over 5 metre, a higher supply voltage is mandatory. For this, we offer our Cali series, which uses a power supply voltage of 48 volts for strips of up to 50 metres.

The Artecta Havana Dropper 2835 - 60 is an IP62-rated LED strip with 60 LEDs/m, that has a silicone spray coating. It is suitable for humid environments, but should not be used in wet conditions. It has a colour temperature of 1700 K (amber) and a high CRI of 90. With a self-adhesive backing, it is easy to install on a smooth, degreased surface. It is best used in an aluminium profile (to cool the LED strip by convection*).
Please note that permanent outdoor installation of the LED strips is not recommended as the silicone is not UV resistant and that due to manufacturing conditions, photometric data may vary between production batches within the EU directive.
* for proper heat dissipation, the profile should NOT be closed with a cover.Technical data:

Light Source Quantity/m:	60
LED Colour Type:	WW+
Light Source System:	SMD2835
Lumen output/m:	515 lm
CRI:	90
CCT:	1700 K
Power Supply:	24 VDC
Power Consumption:	25 W
Power/1 m:	5 W
Length (m):	5 m
Cutting Length:	50 mm
Width (mm):	10 mm
IP Rating:	IP62