Palmer wipper - Passive DI box
- Balancing and impedance matching for guitar, bass, keyboards & synthesizers
- Eliminates ground loop hum thanks to galvanic transformer isolation
- Extremely fail-safe, no power supply required
- THRU-output for passing the input signal to the amplifier
- THRU-output jack can also be used as second input to sum two input signals
- Pure and unaltered low-noise audio
- Handles even high-level inputs without distortion
- Switchable 30 dB pad for extremely high input levels (e.g. amplifier output)
- Solid casing made of aluminium and steel
- Incl. rewritable tour label for attachment onto the back of the wipper
- Engineered in Germany
If you need to pick up the pure sound of your guitar, bass or keyboard, you need a high-quality DI-Box which does not alter the natural sound or add any noise.
The Palmer wipper is a single channel passive DI box with a high-quality transformer, which also handles high levels without distorting or losing the pure sound of your instrument. With a ratio of 10:1, it can be used for optimal impedance and level adjustment to connect instrument signals from guitars, bass, keyboards or synthesisers to a balanced microphone input. At the same time galvanic isolation prevents ground loop hum, so that the signal remains pure, clear and ultra-low noise, without any interference. Thanks to a switchable 30 dB pre-attenuation, the wipper can also be looped in between amplifier output and the loudspeaker.
The Palmer wipper is an easy-to-use problem solver. Its passive construction means it does not need any batteries or a phantom power. This makes it extremely fail-safe and also virtually indestructible thanks to its aluminum and steel casing. With its ability to retain the natural sound of your instrument, it also cuts a fine figure studio and live environments. This way you can simply be true to your sound.
Technical data:| Product type: | DI box |
| Type: | passive |
| Channels: | 1 |
| Transformer isolated: | yes |
| Inputs: | 2 |
| Input type: | unbalanced |
| Input connectors: | 6.3 mm jack |
| Outputs: | 1 |
| Output type: | balanced |
| Output connectors: | XLR |
| THRU outputs per channel: | 1 |
| Input attenuation (Pad): | 0 / 30 dB |
| Ground lift switch: | Yes |
| Additional Features: | mono merge |
| Housing: | Aluminium continuous casting |
| Dimensions (W x H x D): | 50 x 140 x 68 mm |
| Weight: | 0,43 kg |
| Ambient temperature (in operation): | - 20 - 70 °C |
| Relative Humidity: | |
| Accessories (included): | Inscription label (tour label) |
| Accessories (included): | rubber feet |
| Max. input level ( | +24 dBu: |
| Max. input level ( | +32 dBu: |
| Frequency response (±0,2dB, relative 1kHz): | 10 Hz - 60 kHz |
| Input impedance (1 kHz, Setting: 0 dB Pad, THRU): | 47 kOhm |
| Output impedance (1 kHz, Setting : 0 dB Pad, THRU): | 33 Ohm |
| THD (30 Hz, +4 dBu, unity, unweighted): | |
| THD (1 kHz, +4 dBu, unity, unweighted): | |
| IMD (SMPTE) (60 Hz / 7 kHz, 4:1, +4 dBu): | |
| Transformer ratio: | 10 : 1 |
| Mon-Fri: | 08:00 am – 05:00 pm |
| Document type | File size | |
|
Operating instructions | 3.09 MB |
| Mon-Fri: | 08:00 am – 05:00 pm |
| Mon-Fri: | 08:00 am – 05:00 pm |